100-lb A.R.E.A. Tee Rail Specifications, Details, and Drawing

Previous
Next Next Page

100-lb A.R.E.A. Tee Rails


Shown to scale, but not actual size

100-lb A.R.E.A.
Head Width:	2-11/16"		Overall Height:	6"
Base Width:	5-3/8"
Rail Type:	100RE		Area in²:	9.95
Section Number:	10025		Section Modulus in³:
Nominal Weight:	100	lbs/yd	Head:	15.1
Standard Length:	39'		Base:	17.8
Standard Drilling:	2-11/16" X 5-1/2"	with 1-1/8" dia holes
Joint Bar Length:	24"		Moment of Inertia in⁴:	49.0
Joint Bar Weight:	65	lbs/pr	With Bolts, Nuts & Washers:	72	lbs/pr
Track Bolt:	1" X 5-1/2"
Bolt Length May Vary Depending On Bar Manufacturer & Type of Washer Used. See Tee Rail Table for All Rail Dimensions not shown above

DID YOU KNOW
that Harmer Steel

Thank you for visiting our web site. We value you highly as one of our customers. If there is anything we can do to assist you, please don't hesitate to contact one of our knowledgeable sales representatives.

This material has been printed from an internet page currently located at:
www.harmersteel.com /catalog/1/15/100_lb_yd_area_rail.shtml
Printed from IP address: 38.103.63.18on Saturday, 05-Jul-2008 22:25:39 MDT