115-lb A.R.E.A. Tee Rail Specifications, Details, and Drawing

Previous
Next Next Page

115-lb A.R.E.A. Tee Rails


Shown to scale, but not actual size

115-lb A.R.E.A.
Head Width:	2-22/32"		Overall Height:	6-5/8"
Base Width:	5-1/2"
Rail Type:	115RE		Area in²:	11.25
Section Number:	11525		Section Modulus in³:
Nominal Weight:	115	lbs/yd	Head:	18.0
Standard Length:	39'		Base:	22.0
Standard Drilling:	3-1/2" x 6"	with 1-1/8" dia holes
or	3-1/2" x 6" x 6"	with 1-1/8" dia holes
Joint Bar Length:	24" or 36"		Moment of Inertia in⁴:	65.6
Joint Bar Weight:
4-Hole Bars:	68	lbs/pr	With Bolts, Nuts & Washers:	76	lbs/pr
6-Hole Bars:	95	lbs/pr	With Bolts, Nuts & Washers:	104	lbs/pr
Track Bolt:	1" X 6"
Bolt Length May Vary Depending On Bar Manufacturer & Type of Washer Used. See Tee Rail Table for All Rail Dimensions not shown above

DID YOU KNOW
that Harmer Steel

Thank you for visiting our web site. We value you highly as one of our customers. If there is anything we can do to assist you, please don't hesitate to contact one of our knowledgeable sales representatives.

This material has been printed from an internet page currently located at:
www.harmersteel.com /catalog/1/16/115_lb_yd_area_rail.shtml
Printed from IP address: 38.103.63.18on Saturday, 05-Jul-2008 22:28:20 MDT