105-lb Crane Rail Specifications, Details, and Drawing

Previous
Next Next Page

105-lb Crane Rails


Shown to scale, but not actual size

105-lb Crane Rail
Head Width:	2-9/16"		Overall Height:		5-3/16"
Base Width:	5-3/16"
Rail Type:	105CR		Area in²:		10.3
Nominal Weight:	105	lbs/yd	Section Modulus in³:
Standard Length:	39'		Head:		12.39
Standard Drilling:	4" X 5" X 6"	with 15/16" dia holes		Base:	14.28
Angle Bar Length:	34"		Moment of Inertia in⁴:		34.41
Angle Bar Weight:	55	lbs/pr	With Bolt, Nuts, & Washers:		64	lbs/pr
A325 Hex Bolt:	7/8" x 5"

DID YOU KNOW
that Harmer Steel

Thank you for visiting our web site. We value you highly as one of our customers. If there is anything we can do to assist you, please don't hesitate to contact one of our knowledgeable sales representatives.

This material has been printed from an internet page currently located at:
www.harmersteel.com /catalog/2/03/105_lb_yd_crane_rail.shtml
Printed from IP address: 38.103.63.18on Saturday, 05-Jul-2008 22:29:01 MDT