Harmer
Steel
Rail Clamps for Crane Rails
Clamp and Reversible Filler, Loose Fit ("Floating")
No. 205 - Single
No. 206 - Double
|
Rail Section |
Base Width (in) |
Gage ¢ to ¢ holes (in) |
Filler Thickness T (in) |
Est Wt. Clamp (lb.) | Est Wt. Filler (lb.) | ||
| Single | Double | Single | Double | ||||
| 104-CR | 5 | 7-3/4 | 5/8 | 1.6 | 3.2 | 1.3 | 2.6 |
| 105-CR | 5 3/16 | 8 | 1/2 | 1.6 | 3.2 | 1.05 | 2.1 |
| 135-CR | 5 3/16 | 8 | 5/8 | 1.6 | 3.2 | 1.3 | 2.6 |
| 171-CR | 6 | 8 3/4 | 3/4 | 1.6 | 3.2 | 1.6 | 3.2 |
| 175-CR | 6 | 8 3/4 | 5/8 | 1.6 | 3.2 | 1.3 | 2.6 |
NOTE: Clearances L (left) and R (right) can be varied by reversing the filler.
DID YOU KNOW
that Harmer Steel
Thank you for visiting our web site. We value you highly as one of our customers. If there is anything we can do to assist you, please don't hesitate to contact one of our knowledgeable sales representatives.
Home | About | Catalog | Contact | Documents | Information Links | Search | Site Map
Copyright ©
Harmer Steel Products Company / Harmer Steel Ltd. All Rights Reserved.
Printer Friendly
This material has been printed from an internet page currently located
at:
www.harmersteel.com
/catalog/3/09/rail_clamps_loose_fit.shtml
Printed from IP address:
38.103.63.18on
Saturday, 05-Jul-2008 22:26:59 MDT
www.harmersteel.com www.harmersteel.ca