Previous
            Next 

No. 2 Aluminum Track Level

Constructed of extruded, anodized aluminum tubing with cast aluminum ends. A guard rail spacer lug is built into one end casting. Elevation scale offers 0" - 7" readout in 1/8" increments. Scale can be locked at any setting, and slides inside of tube when not in use. Level has adjustable, (A.R.E.A. approved) vial assembly. Level is fully insulated.

No. 3 Aluminum Track Gage

Constructed of the same durable materials as the No. 2 Track level, the No. 3 Gage features a rail stop end fitting provided with guard rail spacer lug, and recessed slots on gage fitting to permit accurate gaging of even heavily runover rail. Track Gage is fully insulated.

No. PG-2 Steel Pipe Track Gage

Schedule 80 pipe center is strong enough to act as a bridge and permit one rail to be forced into gage with the other. Gage is measured 5/8" below top of rail head, as per A.R.E.A. requirements. One end casting has guard rail spacer lug. Product is completely insulated.

Two Man Timber Tongs AREA Plan 8-62
Approx Net Wt.	Jaw Opening (inches)
12#	4 min 15-1/2 max

One Man Timber Tongs AREA Plan 7-62
Approx Net Wt.	Jaw Opening (inches)
10#	4 min 15-1/2 max

Claw Bar 80-B AREA Plan 11-62		Claw Bar 80-B has a shallow throat which provides minimum interference with angle bars and rails. It is ideal for use with 9/16 spikes, smaller rails and areas of tight clearance
Approx Net Wt.	Slot Size (inches)
27#	7/8

Claw Bar 80-C AREA Plan 11-78		Claw Bar 80-C is the most popular claw bar. Its large heel provides maximum leverage.
Approx Net Wt.	Slot Size (inches)
27#	7/8

Spike Puller AREA Plan 9-62
Approx Net Wt.	Jaw Opening	Inside Jaw Width	Length of Tool (inches)
2-1/2#	3/4	1-38	12

Spike Mauls Carbon AREA Plan 3-62		Bell Pattern Alloy Grade B AREA Plan 3-78
Net Wt (Tool Only)	Eye Size (inches)	Diameter		Length (inches)	Length of Handle (inches)
		Long End (inches)	Short End (inches)
10#	1X1-3/8	1-1/4	1-5/8	15	36

Crowbars or Lining Bars High Carbon Steel. Smooth Taper, Roll Forged
Pinch Point
Diamond Point
Wedge Point
Approx Net Wt	Stock		Length (inches)
6#	7/8	X	36
10#	1	X	48
12#	1-1/8	X	51
18#	1-1/4	X	60
22#	1-3/8	X	64
26#	1-1/2	X	66

Rail Tong AREA Plan 6-62
Approx Net Wt.	Jaw Opening (inches)
18#	7/8 min 3-3/4 max

Rail Fork AREA Plan 10-62

Approx Net Wt.

13#

Track Wrench - Double End AREA Plan 4-62
Approx Net Wt.	Jaw Opening (inches)	Width of Nut	Bolt Size (inches)	Length (inches)
10#	1-5/16 & 1-1/2	1-1/4 & 1-7/16	3/4 & 7/8	42
12#	1-1/2 & 1-11/16	1-7/16 & 1-5/8	7/8 & 1	42
14#	1-11/16 & 1-7/8	1-5/8 & 1-13/16	1 & 1-1/8	48
15#	1-7/8 & 2-1/16	1-13/16 & 2	1-1/8 & 1-1/4	48
16#	2-1/16 & 2-1/4	2 & 2-3/16	1-1/4 & 1-3/8	48

Track Wrench - Single End AREA Plan 4-62
Approx Net Wt.	Jaw Opening (inches)	Width of Nut	Bolt Size (inches)	Length (inches)
8#	1-5/16	1-1/4	3/4	30
10#	1-1/2	1-7/16	7/8	36
12#	1-11/16	1-5/8	1	42
14#	1-7/8	1-13/16	1-1/8	48
16#	2-1/16	2	1-1/4	48
18#	2-1/4	2-3/16	1-3/8	54

Thank you for visiting our web site. We value you highly as one of our customers. If there is anything we can do to assist you, please don't hesitate to contact one of our knowledgeable sales representatives.