One-Piece Rail Clips & Crane Stops

Click Image to Open PDF Adobe Acrobat PDF icon

ONE-PIECE RAIL CLIPSNo. 106 Weight - 1.06 lbs.For all sections 60 - 90 lb.No. 120 Weight - .91 lbs. For all sections 25 to 40 lb.No. 114 Weight - .23 lbs. For all section 12 to 40 lb.No. 103 Weight - .60 lbs. For all sections 40 - 100 lb.No. 62 Weight - 1.20 lbs. For Crane rail sections 104, 105 & 135 Tee rail sections 90 - 136 lb. 1-1/16 inches 1-1/4 inches 1-1/4 inches 2-1/2 inches 15/16 inches 2-3/4 inches 3/4 inches 3/4 inches 3/8 inches 7/8 inches 1/4 inches 2 inches 1/8 inches 3-1/4 inches 1 inches 2 inches 1 inches 13/16 inches 1-1/4 inches 1-1/4 inches 3/4 inches 9/16 inches 2-1/2 inches 5/16 inches 1 1° 34 feet 1 inches 2 inches 1 inches 25/32 inches 1-1/16 inches 2-1/4 inches 3/4 inches 3/4 inches 1/4 inches 5/8 inches 5/8 inches 19/64 inches 1 0˜ 31/64 inches 3/4 inches 3/4 inches 21/32 inches 1/2 inches 1/2 inches 1/2 inches 7/16 inches 1/4 inches 1-11/16 inches 1-1/2 inches 11/64 inches 1 3˜ 1/16 inches 1 inches 2 inches 1 inches 1 inches 3/4 inches 3/4 inches 1-1/2 inches 3-1/4 inches 25/32 inches 1-1/16 inches 5/16 inches 1 3˜ 31/64 inches
ONE-PIECE RAIL CLIPS, CRANE STOPSCrane StopsThis Heavy-Duty Crane Stop is for use on all rail sizes (up to and including 175-lb.) and especially where large cranes are operating. It is fabricated to necessary height and contour to correspond with the wheel diameter of the crane. Specify rail size and wheel diameter when ordering.Several other types of crane stops are also available. Lighter duty stops, and stops designed to contact a bumper mounted on the crane are two varieties commonly requested.No. 171 Weight - 3.60 lbs.For 171 lb. Crane rail.No. 175 Weight - 2.19 lbs. For 175 lb. Crane rail.Cushion-Slide Crane StopsDrag plates allow wedge to slide some distance to absorb impact. On smaller sizes of rail, plates may interfere with rail hook bolts. Allow suf˜cient sliding distance between cranes. Stopping distance depends on weight and speed of crane. Do not use at end of crane run.Wheel Contact Type Wedges are made for a speci˜c wheel diameter. Plates are cut to ˜t a speci˜c rail size and section.Bumper Contact TypeFits most standard crane bumpers. Wedge stands 15 inches above top of rail. Underside of crane bumpers should be no more that 12 inches above top of rail. Plates are cut to ˜t a speci˜c rail size and section. 1-1/16 inches 1-1/4 inches 1-1/4 inches 2-1/2 inches 4-1/2 inches 1-1/2 inches 2-1/4 inches 3/4 inches 3/4 inches 1-1/2 inches 1/8 inches 1/8 inches 5/16 inches R 2-1/2 inches 2 inches 1 inches 3-1/2 inches 1-1/8 inches 1-1/8 inches 7/8 inches 3/8 inches 1-3/8 inches 1-3/8 inches 2-3/4 inches 1-1/16 inches 5/16 inches R 5/16 inches 1/8 inches