Rail Clamps for Tee Rails

Click Image to Open PDF Adobe Acrobat PDF icon

RAIL CLAMPS FOR TEE RAILS Rail Clamps with Eccentric Fillers 2" Overall Width Single Clamp (One Filler per Clamp) 5" 3" Bolt Overall Centers Width Double Clamp (Two Fillers per Clamp) 3/8" 1-3/16" Rail Base Width 1/16" 1/16" Bolt Gage 1-3/16" 1/8" 20-lb., 25-lb and 30-lb. 1/4" 40-lb. to 85-lb. 1-1/4" 2-3/8" Note: 13/16" Diameter Holes are standard. Rail Sec. 20 AS 25 AS 30 AS 40 AS 60 AS 80 AS 85 AS Bolt Gage 5-1/8" 5-1/4" 5-5/8" 6" 6-3/4" 7-1/2" 7-11/16" Single Double Clamp No. Clamp No. 201 251 301 401 601 801 851 202 252 302 402 602 802 852 1-3/16" 1-5/16" 2-1/2" 1-1/8" Eccentric Filler For conditions not listed, please specify: A. Rail weight and section. B. Bolt gage. C. Bolt centers for double clip. D. Bolt size (diameter) or hole size. E. Width of clip. F. If worn rail, width, thickness and taper of rail base. Clamps with eccentric fillers are used where small gage adjustments are required. Through positioning of the eccentric fillers, the adjustment range is 3/16 in. Both single clamps (with one eccentric filler per clamp) and double clamps (with two fillers per clamp) are available for rail weights of 20 to 85 lbs. III – 10 (503) 286-3691 FAX (503) 286-2097 © 2007 www.HarmerSteel.com sales@harmersteel.com